When users find their phones flooded, do not panic, the correct treatment,
it is possible to minimize the losses. So what is the correct mobile water
treatment method? do you know? In this regard, it is to teach you how to do.
Mobile water the correct approach:
1, first of all, find their mobile water when you want picked up
immediately, the longer the phone is immersed in water, the greater the extent
of damage, and therefore found their mobile water should not hesitate to finish
it first!
2, picked up the phone, the phone do not make any key operation, the first
of the phone will power down. Remove the back cover stripping out the batteries,
now common one machine will need to press the power button to turn off the power
first, so that water can reduce the phone’s internal parts damage. Take out the
SIM card, do not press any excess, otherwise a short circuit may cause the
phone.
3, you can take the hair dryer blowing, but we must remember that only
remote with cold air, even blowing, do not blow the hot air is close, it would
be circuit aging. If strong hands, you can try to open the machine, take off the
battery, wipe the board with anhydrous alcohol carefully, the alcohol evaporates
away by water board.
4, you can put the phone around the openings sealed with tape, or a mobile
phone loaded with bags is good, then the phone into the rice. The rice is then
left for 12 hours in a small lamp, because there will be around after a small
lamp to open the heat generated, the temperature is not too high, will not
damage the phone, the other on the rice because rice has a strong absorption
capacity.
Well, that’s the correct solve the mobile water treatment methods. For
users, I believe that very useful. Then it may be forwarded favorites now!
没有评论:
发表评论