Teach you how to replace the battery to the iPhone 6 plus?

For the use of iphone 6 plus users, if their cell phone battery is broken, the most cost-effective way is to replace a new battery. Then how to replace their iphone 6 plus battery? Here to teach you how to do?
Replacement iphone 6 plus preparation tools: custom screwdriver, sucker, pry bar, pick pad, iPhone 6 plus replacement battery
Special reminder: Disassemble, be sure to remember to turn off the phone
Locate the two pentagon screws on the sides of the phone's charging connector

Use a professional screwdriver to unscrew the screws and properly stored (you can give the screw number stored to avoid mixing with other screws)

The use of sucker adsorption in the mobile phone screen above the home button, the screen and the fuselage opened a hole (to insert the paddles can)

Use the paddles to tilt the phone screen a little around the screen

The screen erected (the top of the screen and the fuselage is still connected, pay attention to stand up angle of not more than 90 °)

Locate and remove the screws that secure the screen cable and remove the metal cover

Use the pry bar to separate the screen cable and the body (there are several layers of cable)

Place the screen aside and locate the battery cable

Unscrew the screw holding the battery cable and remove the metal cover

Use the pry bar to raise the battery cable

Remove the original battery (Note: the battery and the fuselage between the adhesive strip, remove the battery need to use the plastic pad slowly tilt ... Raiders also said that the Internet is broken in the case of strips can be heated with a hair dryer phone back , So that the softening of the adhesive, and then use the paddle pry open, but taking into account the fragility of the battery, be sure to be careful in the actual operation, is likely to accidentally ignite cell phone battery ...)

A friend will certainly be curious why the iPhone6p apart is not Apple's original battery, in this explanation: because there are some risks of their own teardown, so Xiao Bian is successful in the teardown after the production of the tutorial, please forgive you!

Disassemble completed, began to re-install the phone battery
Tear off the new battery protection film (the replacement of the new battery will usually bring their own adhesive)

Insert the new battery into the battery compartment of the phone

Hand or dial the battery cable and the fuselage cable slot fit

Secure the battery cable, reset the metal housing and tighten the screws

The screen cable and the top row of the fuselage cable slot fit

Fix the screen cable, reset the metal housing and tighten the screws

Fit the screen with the fuselage, pressing along the fuselage, fastening a good phone, set screws

OK, the battery replacement is complete, you can boot normally use, battery replacement success ...

Well, the above method is suitable for hands-on ability of users. If your ability is not too strong, it is best to go to a professional phone repair center to replace the battery bar.

Let your iphone 6 plus battery life doubling the five practical methods

　　Iphone 6 plus battery is not unloaded, and there is life limit. Therefore, each iphone 6 plus users need to learn to maintain the battery for the job, so as to make their own mobile phone use longer, and thus play an indirect cost savings purposes. Then the following we together to find out how to give the iphone 6 plus battery maintenance?
　　Let your iphone 6 plus battery life doubling the five practical methods
　　1, just buy the phone do not rush charging
　　Just start iphone 6 plus users do not rush to charge, when using the power to 10% of the time you are prompted to charge the shutdown, charge in the shutdown state, the first time to use the remaining 10% fully charged time is about 4 hour.
　　2, first connect the data cable, and then charge
　　Many users use mobile phone charging are directly connected to the data port on the iphone 6 plus, does not know that the battery on the iphone 6 plus will cause harm. The correct way is to first plug the data cable into the iphone 6 plus charging interface, and then plug the two-hole plug socket.
　　3, the charging ambient temperature should be moderate
　　0 degrees to 35 degrees of charging environment is the most appropriate, of which 22 degrees is the best charging environment, it should be noted that, iphone6plus in low temperature environment is not conducive to charging.
　　4, the charge is completed in time to cut off the power
　　Many users are related to sleep at night when the charge, which, in order to prevent overshoot full after the proposed timely unplug the power.
　　5, charge off the back shell
　　In order to facilitate the iphone 6 plus charge to play to the best heat dissipation, it is recommended that when the phone will charge back shell off.

　　Well, more than these five methods for the maintenance of the iphone 6 plus battery is very useful, users may wish to try to do a do!