Teach you how to replace the battery to the iPhone 6 plus?

For the use of iphone 6 plus users, if their cell phone battery is broken, the most cost-effective way is to replace a new battery. Then how to replace their iphone 6 plus battery? Here to teach you how to do?
Replacement iphone 6 plus preparation tools: custom screwdriver, sucker, pry bar, pick pad, iPhone 6 plus replacement battery
Special reminder: Disassemble, be sure to remember to turn off the phone
Locate the two pentagon screws on the sides of the phone's charging connector

Use a professional screwdriver to unscrew the screws and properly stored (you can give the screw number stored to avoid mixing with other screws)

The use of sucker adsorption in the mobile phone screen above the home button, the screen and the fuselage opened a hole (to insert the paddles can)

Use the paddles to tilt the phone screen a little around the screen

The screen erected (the top of the screen and the fuselage is still connected, pay attention to stand up angle of not more than 90 °)

Locate and remove the screws that secure the screen cable and remove the metal cover

Use the pry bar to separate the screen cable and the body (there are several layers of cable)

Place the screen aside and locate the battery cable

Unscrew the screw holding the battery cable and remove the metal cover

Use the pry bar to raise the battery cable

Remove the original battery (Note: the battery and the fuselage between the adhesive strip, remove the battery need to use the plastic pad slowly tilt ... Raiders also said that the Internet is broken in the case of strips can be heated with a hair dryer phone back , So that the softening of the adhesive, and then use the paddle pry open, but taking into account the fragility of the battery, be sure to be careful in the actual operation, is likely to accidentally ignite cell phone battery ...)

A friend will certainly be curious why the iPhone6p apart is not Apple's original battery, in this explanation: because there are some risks of their own teardown, so Xiao Bian is successful in the teardown after the production of the tutorial, please forgive you!

Disassemble completed, began to re-install the phone battery
Tear off the new battery protection film (the replacement of the new battery will usually bring their own adhesive)

Insert the new battery into the battery compartment of the phone

Hand or dial the battery cable and the fuselage cable slot fit

Secure the battery cable, reset the metal housing and tighten the screws

The screen cable and the top row of the fuselage cable slot fit

Fix the screen cable, reset the metal housing and tighten the screws

Fit the screen with the fuselage, pressing along the fuselage, fastening a good phone, set screws

OK, the battery replacement is complete, you can boot normally use, battery replacement success ...

Well, the above method is suitable for hands-on ability of users. If your ability is not too strong, it is best to go to a professional phone repair center to replace the battery bar.