Five kinds of phone screen drift effective way of solving

　　The so-called mobile phone screen drift refers to the screen when the user points A, B is to respond at, which seriously affect their experience. So in this case, how to solve it? In this regard, we take a look!
　　Five kinds of phone screen drift effective way of solving
　　1, discharge any static electricity
　　You can open the back cover of the phone, you can shut out the phone battery, the phone was allowed to stand for about 5 minutes later, the USB data cable to connect your phone. After the hand a little wet, not dry, with the thumb touching the other end of the USB cable to a metal part of the index finger to the ground about two seconds. This method can be released in static mobile phone screen.
　　There is another method that is a discharge of static electricity, open the back cover, in the wet state of the hand, with the thumb touching the phone board vibrator, according to the index finger to the ground about two seconds. Phone vibrator location in the battery compartment next door, open it wants to see a small piece of metal.
　　2, to the mobile phone to provide a stable voltage
　　If the case of failure the phone screen appears in the charged state, it may be due to voltage instability or use of non-original data cable adapter charging lead, for a voltage stable environment, using the original data cable can charge.
　　3, tear phone film
　　Long-term mobile phone film is not replaced, over time, can cause screen drift. If the causes, ripping the phone screen film can be solved.
　　4, hair dryer
　　This method has risks, we need to be cautious. If it is a long-term stay in a humid environment, the mobile phone is already after the dead horse a living horse medicine status in a while, you can put the phone off, remove the batteries, phone cards, memory cards, etc., with a hair dryer at the mobile phone clearance blow slot opening screen wait about 25 minutes, and then placed in dry and ventilated place to dry half-day or a day, try to come back and re-assembled. If caused by moisture, it will return to normal.
　　5, electroporation
　　This method has been confirmed by practice on the part of the phone useful, but not necessarily all phones are applicable, but there are certain risks. Play machine has risk, try to be cautious. Paper towels moistened with water covering the phone screen drift or failure of the place, and then with a lighter in an electrostatic filter shock drift / failure where the electrical field.

　　Well, if we encounter this phenomenon drift phone and follow these 5 ways to give it a try!